Walker
Walker is a fitting for both indoor and outdoor use. The Walker
makes surroundings and buildings more dramatic and pleasing to the eye.
It can also be used as a guide along outside paths.
The fitting is composed of a screen in unbreakable polycarbonate highly resistant against pollution and atmospheric thermic agents and stained glass diffuser.
The case with the components and the recessed box for the fitting to the ground are made in high resistant thermoplastic. The coupling between the screws is stainless steel, and the use of a double gasket is resistant to high temperatures.
Fresnel Sheedy 4010
Garden lamp with diffuser type Fresnel fitted on an aluminium
extruded tube.
Colours
REPLAY INOX
The REPLAY INOX series of external light fittings suitable for lighting
up gardens, walkways and areas open to traffic. Provides cutting edge
design and function
Specifications: IP55
The CIRCA series of light fittings suitable for lighting up gardens, walkways and areas open to traffic.
Specifications: IP67
Colours:
CIRCA 3660
Embedded walk-over lamp.
CIRCA 3684
Embedded walk-over lamp.
500 SERIES
The 500 Series is made in a thermoplastic material reinforced with fibre
glass, the reflector is aluminium, with tempered glass diffuser.
MAXIM
Decorative range of bollards and matching wall lights designed especially
for the use of self ballasted compact fluorescent lamps.
Available in
BREAK-REFLEX
Recessed wall light range with built in electronic transformer.
Specification: IP65
Body: Aluminium
Diffuser: Tempered satin crystal
Paint: Polyester.
Housing: Technopolymers
Colours: White & Aluminium
SH-6B/L
Specifications: IP68
Materials - Diecast Aluminium.
Finish - Black
Operating Voltage - 12V 3.6W
Lamp type - 12 ultra bright
LED
Lamp colours - White & Blue LED
This range supplied with 3m flex.
Spike accessory available.
SH-3A
Specifications: IP68
Materials - Diecast Aluminium.
Finishes - Black, green and Silver
This range supplied with 3m flex.
SH-3B
Specifications: IP68
Materials - Diecast Aluminium.
Finishes - Black, green and Silver
This range supplied with 3m flex.
SH-3C
Specifications: IP68
Materials - Diecast Aluminium.
Finishes - Black, green and Silver
This range supplied with 3m flex.
SH-2A
Flush mount path/step lights.
Specifications: IP44
Materials - Diecast Aluminium.
Finishes - Black, Green and Silver.
SH-2B
Flush mount path/step lights.
Specifications: IP44
Materials - Diecast Aluminium.
Finishes - Black, Green and Silver.
SH-4A
Up down column light.
Specifications: IP44
Materials - Diecast Aluminium.
Finishes - Black and Silver.
WIP
Recessed LED wall or in ground range.
Specifications: IP67
Body - Polycarbonate
Ring - Anodized alumium
Load - Max 1000kg
Lamp - < 2.5w, 7 LED, 240 50Hz
Shockproof - 20joule - IK10 GWT 850°C
Versatile LED range allowing fitting to be recessed into floors, wall
and ceilings, which can also be submerged in ponds
CT-0113-SS
Specifications: IP68
Housing & Frame - diecast
aluminium.
Glass - 12mm convex toughened
Front Panel - 316 polished stainless steel
Lamp colours - White, Blue and green.
Note - Fitting comes with 1.5m cable.
A Separate 6W IP67 Transformer is also available
CT-0122-SS
Specifications: IP67
Housing & Frame - diecast
aluminium, stainless steel screws and silicon gasket
Glass - 9mm convex toughened
Front Panel - 316 polished stainless steel
Lamp colours - White, Blue and green.
Specifications: IP54
Housing & Frame - Diecast
aluminium, stainless steel screws, silicon gasket, brass socket.
Glass - 5mm thick prismed
Front panel colours -
Lamp colours - White, Blue and Green
Indirect recessed wall LED series with a 30º downward throw
Specifications: IP54
Housing & Frame - Diecast
aluminium, stainless steel screws, silicon gasket, brass socket.
Glass - 4mm thick prismed
Front panel colours - Black and Grey
Lamp colours - White, Blue and Green
